Robotic handling on the Solarix module line

Power from
both sides.

Heterojunction utility modules up to 725 W, built on an automated U.S. line.

Request data sheetContact project sales
Peak power
725 W1
Top power class · At the 725 W class
  1. Standard test conditions (1,000 W/m², 25 °C, AM 1.5), per the Utility ULTRA HJT data sheet.

More from the rear, less lost to heat

Heterojunction cells add thin layers of amorphous silicon to both faces of an n-type silicon wafer. In Kiwa PVEL's 2026 Scorecard testing, HJT modules as a group showed higher median bifaciality and a better temperature coefficient than the TOPCon and PERC modules most of the market builds.

On trackers and reflective ground, both show up directly in the energy model.

How the cell works

Industry benchmark: median bifaciality by cell technology, all manufacturers

Median power temperature coefficient (lower loss is better)

HJT
−0.26%/°C
Back contact
−0.27%/°C
TOPCon
−0.29%/°C
PERC
−0.32%/°C
Source: Kiwa PVEL, 2026 PV Module Reliability Scorecard, PAN test medians for bills of materials produced 2023–2025. The HJT and back-contact samples are significantly smaller than the TOPCon and PERC samples. Industry data, not Solarix product results; request the Utility ULTRA HJT PAN file for project modeling.

What those numbers do on a hot tracker site

Two calculations an energy model runs on every hour of the year: power lost when cells run hot, and power gained from light reaching the rear.

Cell technologyPower lost at 65 °C cell temperatureRear-side gain per 10% rear irradiance
HJT−10.4%
+8.6%
Back contact−10.8%
+7.1%
TOPCon−11.6%
+7.7%
PERC−12.8%
+7.0%

Worked example using Kiwa PVEL 2026 Scorecard medians (industry data, not Solarix results). First-order estimate: loss = temperature coefficient × (65 °C − 25 °C cell temperature), excluding irradiance, spectral and soiling effects. Gain = bifaciality × 10% rear irradiance, before mismatch and shading losses. Your PAN file and site model govern.

Close-up of heterojunction cells and busbars on a Utility ULTRA HJT module

Utility ULTRA HJT · heterojunction cells

Goldi America product line

Utility ULTRA HJT

Bifacial, dual-glass, galvanized steel frame. For fixed-tilt and single-axis tracker projects where rear-side yield and long-term degradation decide returns.

Full specificationsData sheet & PAN file
Power output
up to 725 W
Robotic module handling on the Solarix line

The tax credit depends on the supply chain

For 45Y and 48E facilities that begin construction after December 31, 2025, eligibility depends in part on the material assistance cost ratio: the share of manufactured-product direct costs not attributable to prohibited foreign entities. Solar facilities that did not begin construction by July 4, 2026 must also be placed in service by December 31, 2027 (Notice 2025-42). These are the gates, and what we provide your counsel for each.

GateWhat it requiresWhat Solarix provides
Foreign-entity restrictionMaterial assistance cost ratio at or above the threshold for the year construction begins (40% for 2026), under interim guidance in IRS Notice 2026-15. Separately, taxpayers that are specified foreign entities or foreign-influenced entities are ineligible.Supplier certifications for the module bill of materials, on request.
Domestic content bonusU.S. steel and iron, plus a U.S. share of manufactured-product cost at or above the statutory percentage, calculated with the Notice 2025-08 safe-harbor tables.Component cost data in the safe-harbor format.
Customs and forced laborDocuments tracing each material back to the quartzite, to support U.S. Customs reviews of imported inputs under the Uyghur Forced Labor Prevention Act.Chain-of-custody records per shipment.
DeliveryModules on site when the racking crew is.Finished modules ship from the Forest, Virginia plant.

Orientation only, not tax advice. Status as of November 2026. Your tax counsel determines eligibility.

Compliance documentation

What your independent engineer will ask for

Bankability package
DocumentIssued by
Data sheet and PAN / OND filesSolarix
Domestic content and FEOC documentationSolarix

Who we supply

Solar Technology Outlook 2030 · independent industry data

Solar runs on a semiconductor roadmap.

Read the outlook

Efficiency

Tandem lab cells have passed the single-junction limit

30%32%34%36%20242025202633.7% · theoretical limit, any single-junction cell~29.4% · theoretical limit, crystalline silicon35.5%33.9%
Certified perovskite-silicon tandem records (LONGi; NREL- and ESTI-certified). Laboratory cells.

Demand

U.S. data center electricity, 2024 to 2030

0 TWh200 TWh400 TWh600 TWh2024192 TWh · 4.7% of U.S. use2028464 TWh · reference case2030649 TWh · 11.8% · reference case
Lawrence Berkeley National Laboratory, Data Center Energy Usage Report: 2025 Update (June 2026). Dashed values are projections.
35.5%
Certified tandem lab cell (LONGi, ESTI), July 2026
26%
Module price decline per doubling of shipments, 1976–2025
12.0 → 4.3
Heterojunction silver, mg/W, 2025 to 2036 (projection)
649 TWh
U.S. data center use in 2030, LBNL reference case (projection)

Third-party laboratory, survey and government data. These figures describe the industry, not Solarix products.

Insights

All insights
Carlos Class Jr., CEO, on the Solarix factory floor

Veteran-led

Solarix is led by CEO Carlos Class Jr., a U.S. Army veteran. Its CTO and COO have worked together on heterojunction technology for more than a decade.

In 2024, Solarix acquired a former pharmaceutical plant of more than 420,000 square feet and converted it to automated module manufacturing.

Leadership
Aerial view of the Solarix manufacturing facility

The plant · 420,000+ sq ft, re-engineered for module manufacturing

Contact project sales

Contact project sales Request data sheet